Motorola (Vertex Standard) VXR-7000 UHF Repeater (VXR-7000UA) 16 Channel, 50 Watt, 400-430 MHz, UHF Desktop Repeater.. Product #: VXR-7000UA based on 0 reviews Special Order

VXR-7000 UHF 5 Watt Repeater

Brand: Motorola (Vertex Standard)
Product Code: VXR-7000UA
Availability: Special Order

  • 16 Channels
  • 10 to 50 Watts (adjustable)
  • VHF: 136 – 150 MHz; 150 – 174 MHz
  • UHF: 400 – 430 MHz; 450 – 480 MHz
  • 8-Character ANI/ENI ID Display
  • FCC Narrowbanding Compliant

The VXR-7000 helps expand communication range of two-way radio systems, and can operate as a base station. Continuous-duty and cycle-rated to enhance productivity for a maximum return on investment.

Local or Remote Operating Capability

Controlled by the operator with a press of a button, the VXR-7000 is designed to function as programmed. Or, switch to remote mode and the unit is controlled by instructions received from an external device connected to the accessory connector.

When Safety Counts

Has built-in DTMF decoding to coordinate with the Emergency and ANI functions found in Vertex Standard mobile and portable two-way radios. If an Emergency alert is received from a mobile or portable radio, the VXR-7000 will beep loudly and blink the LCD to notify the dispatcher of the emergency alert.

Uninterrupted Power Supply

For uninterrupted operation during power failures, a 12-volt rechargeable battery may be connected. During a power outage, the automatic power control circuit will immediately switch the repeater to the backup battery.

Convert To Talk At A Press Of A Button

Can immediately switch to function from repeater mode to base station mode simply by pressing the Push To Talk transmit button. Once released, the unit converts back to repeater mode.

FCC Narrowbanding Compliant

Meets the FCC Part 90 requirement for using 12.5 kHz channels by January 1, 2013.

Additional Features

  • 47 CTCSS / 108 DCS Encode / Decode
  • CW ID Transmitter
  • Busy Channel Lock Out and Busy Tone Lock out unctions
  • DTMF Encode / Decode
  • 5-Tone Encode / Decode
  • Mult-Tone Encode / Decode
  • Community Repeater Operation (up to 16 tones)
  • Time-Out Timer, Hang Timer and Guard Timer
  • D-Sub 25 Pin Accessory Connector
  • Line Interface Port


  • Duplexer Installation Kit
  • Internal VHF Duplexer 148 – 160 MHz
  • Internal UHF Duplexer 440 – 470 MHz

General Specification
Frequency Range 400 - 430 MHz
Number of Channels and Groups 16
Power Supply Voltage 115 / 230 V AC ±10% 50/60 Hz or 13.8 V DC
Channel Spacing (Analog) 12.5 / 25* kHz
PLL Steps
Current Consumption
Operating Temperature Range -22ºF to +140ºF (-30ºC to +60ºC)
Frequency Stability ±2.5 ppm
RF Input-Output Impedance 50 Ohms
Dimension (H x W x D) 4.5 x 12.8 x 15.4 inches (115 x 325 x 391.5 mm)
Weight (Approx.) 22 lbs (10 kg)
Display 8 Character ANI/ENI ID Display
IP Rating
Receiver Specification
Sensitivity 12dB SINAD 0.35 µV
Adjacent Channel Selectivity 75 dB / 70 dB
Intermodulation 75 dB
Spurious and Image Rejection 80 dB
Audio Output 4 W @ 4 Ohms
RX Hum and Noise
Transmitter Specification
Output Power 10 to 50 W (adjustable)
Modulation 16K0F3E, 11K0F3E
Maximum Deviation ± 5.0 kHz / ± 2.5 kHz
Audio Distortion 2.5 % @1 kHz
Conducted Spurious Emission Better than 75 dB below carrier
TX Hum and Noise
There are no reviews for this product.
Write a review
Facebook comment