JVC Kenwood NXR-710/810 Series Analog/NXDN Repeater (NXR-710K) Repeater, Digital (NXDN) / Analog, VHF, 136-174MHz, 25-50W.. Product #: nxr-710k based on 0 reviews Special Order

NXR-710 VHF 50 watt Analog/NXDN Repeater


Brand: JVC Kenwood
Product Code: nxr-710k
Availability: Special Order

General Features

  • Frequency Range
    • VHF: 136-174 MHz (NXR-710)
    • UHF: 450-520 MHz, 400-470 MHz (NXR-810)
  • RF Output
    • VHF: 50 W @ 50% duty, 25 W @ 100% duty (NXR-710)
    • UHF: 40 W @ 50% duty, 25 W @ 100% duty (NXR-810)
  • Repeater Operation
  • Duplex / Simplex Base Operation
  • 30 CH Scanning Base
  • Two-Digit LED Display
  • 6 Lighted Programmable Function Keys
  • Front Panel Speaker
  • Rear External Speaker Output (4 W Audio)
  • Volume Control
  • Microphone Jack
  • Program Interface
  • Remote Termination Interface
  • Programmable AUX I / O's
  • RF Power Down Detect
  • DTMF Front Panel PF Key Control
  • DTMF AUX Output Control
  • DTMF AUX Input Monitoring
  • External Frequency Reference (10 MHz) Connectivity
  • Windows® PC Programming
  • Flash Firmware Upgrading

For Digital

  • NXDN® Digital Air Interface
  • Conventional IP Network
  • AMBE+2™ VOCODER
  • 6.25 & 12.5 kHz Channels
  • Mixed FM / Digital Operation
  • NXDN® Scrambler Built-in
  • 16 RAN Repeater Control Built-in
  • 1,000 GIDs Per Site
  • 1,000 UIDs Per Site
  • Individual & Group Selective Call
  • All Group Call
  • NXR Over-the-air Alias

For Analog

  • VHF: 12.5 kHz Channels
  • UHF: 12.5 kHz Channels
  • Built-in Scrambler
  • 16 QT / DQT Repeater Control Built-in
  • Hang Timer / Time Out Timer / CW ID
  • External FM Controller Interface
  • EIA Voter Tone Generation
  • External LTR® Controller Interface
  • External MPT Controller Interface

Optional Modes

  • NXDN Multi-Site Conventional (KTI-3M required)
  • NXDN Voter (KTI-3M required)

General Specification
Frequency Range 136-174 MHz
Number of Channels and Groups 30 Channels and 1 Group
Power Supply Voltage 13.8 V DC ± 15%
Channel Spacing (Analog) 6.25 / 7.5 / 12.5 / 15 kHz
PLL Steps 2.5 / 3.125 kHz
Current Consumption
Operating Temperature Range -22˚ F to +140˚ F (-30˚ C to +60˚ C)
Frequency Stability ± 1.0 ppm
RF Input-Output Impedance 50 Ohms
Dimension (H x W x D) 3.5 x 19 x 13.3 in (88 x 483 x 340 mm)
Weight (Approx.) 21.4 lbs (9.7 kg)
Display 2 Digit LED Display
IP Rating
Receiver Specification
Sensitivity 12dB SINAD 0.28 µV
Adjacent Channel Selectivity 77 dB (± 12.5 kHz)
Intermodulation 80 dB
Spurious and Image Rejection 90 dB
Audio Output 4 W (at 4 Ω, less than 5% distortion)
RX Hum and Noise 50 dB
Transmitter Specification
Output Power 25 W to 50 W
Modulation 16K0F3E, 11K0F3E, 8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D
Maximum Deviation ±2.5 kHz Analog
Audio Distortion Less than 2.5% at 1000 Hz
Conducted Spurious Emission 80 dB
TX Hum and Noise 50 dB
There are no reviews for this product.
Write a review
BadExcellent
Facebook comment