JVC Kenwood TK-3230 UHF Portable Radio (TK-3230K) 6 Channel, 1.5 Watt, 460-467 MHz, UHF BRS Portable Radio.. Product #: TK-3230K based on 0 reviews Special Order

TK-3230 UHF 1.5 Watt Portable Radio

Brand: JVC Kenwood
Product Code: TK-3230K
Availability: Special Order

Compact, Lightweight Design & Operating Ease

Compact enough to carry anywhere with ease, this smart new radio has a distinctively ergonomic form that’s handy to hold and operate. It weighs a mere 5.5 oz (155 g) with the rechargeable Li-ion battery and control buttons, which are simple to use with PTT, MON, MENU, CALL, UP and DOWN operations.

1.5 Watts Transmit Power & Range of up to 5 Miles

The ProTalk® XLS offers 1.5 watts of power to enable direct radio-to-radio communication on the same frequency (simplex) for up to 5 miles.

Talk Range

Open areas without obstructions Up to 5 miles (8 km)
Residential areas (near buildings) Up to 1.5 miles (2.4 km)
In steel and/or concrete reinforced buildings Up to 225,000 sq. ft (20,900 sq. m)
In high-rise buildings Up to 17 floors
Note: Talk range will vary based on terrain and conditions.

All-in-One Package

The ProTalk® XLS is ready for use immediately after purchase. It comes with all necessary accessories, including a fast charger, a 2,000 mAh Li-ion battery and a belt clip.
Battery life (5-5-90 duty cycle) Saver on: 18 hours
Saver off: 14 hours
Battery charging time 2.5 hours

56 Programmable Pre-stored Frequencies

Each of the 2 channels can be programmed by the user to any of the 56 pre-stored frequencies.

39-QT/ 83-DQT Coded Squelch

Sub-audible QT tone & DQT digital codes mute undesired voice traffic audio and segregate user talk groups on shared frequencies or radio system. The user can pick any of the pre-stored channel settings — 39 QT tones and 83 DQT codes.


The ability to choose frequency and QT/DQT channel settings allows the ProTalk® to operate on the same channels and coded squelch tones as other UHF business radio brands. So choosing the Kenwood ProTalk® XLS will not impact on any of your previous investments in radio equipment.

SELCALL — FleetSync® PTT ID and Caller ID Display

Kenwood’s FleetSync® digital signaling system includes PTT ID digital ANI for instant radio call identification. FleetSync® also includes caller ID display and selective calling (Individual call, Group call and Broadcast call). Users can also set the alert tone (1-10, Off) for Individual call and Group/Broadcast call.

4-digit 7-segment LCD with Backlight

The large 4-digit 7-segment display makes it easy to check on both channel and signaling information. There is also a 3-level icon in the LCD to indicate how much battery power is left.

Channel Scan

Scanning is a simple way to monitor multiple channels without manually searching.


  • Apply MIL-STD C, D, E, F - 8 items
  • Built-in VOX
  • Built-in Privacy Talk®
  • Key Lock/Super Lock
  • Compander
  • Battery Saver
  • 10-call Alert Tone
  • Scan
  • Busy Channel Lockout

General Specification
Frequency Range 464-467 MHz
Number of Channels and Groups 6 Channels and 1 Group
Power Supply Voltage 3.8 V DC±10 %
Channel Spacing (Analog) 12.5
PLL Steps 5 / 6.25 kHz
Current Consumption
Operating Temperature Range –14° F to +140° F (–10° C to +60° C)
Frequency Stability ±2.5ppm
RF Input-Output Impedance 50 Ohms
Dimension (H x W x D) 4.07 x 2.07 x 1.13 in. (103.5 x 52 x 28.7 mm)
Weight (Approx.) 5.5 oz (155 g)
Display 4-digit 7-segment LCD
IP Rating
Receiver Specification
Sensitivity 12dB SINAD 0.28 uV typical
Adjacent Channel Selectivity 50 dB
Intermodulation 50 dB
Spurious and Image Rejection 55 dB
Audio Output 100 mW
RX Hum and Noise
Transmitter Specification
Output Power 1.5 / 0.5 Watt
Modulation 11K0F3E
Maximum Deviation ±2.5 kHz
Audio Distortion less than 5 % (@1 kHz)
Conducted Spurious Emission 50 dB
TX Hum and Noise 34 dB
There are no reviews for this product.
Write a review
Facebook comment