Motorola (Vertex Standard) VXR-9000 VHF (A) Repeater (VXR-9000VA) 32 Channel, 50 Watt, 134-160 MHz, VHF RackMount Repeater.. Product #: VXR-9000VA based on 0 reviews Special Order

VXR-9000 VHF (A) 50 Watt Repeater

Brand: Motorola (Vertex Standard)
Product Code: VXR-9000VA
Availability: Special Order

  • 32 Channels
  • 50 Watts or 100 Watts
  • VHF: 134 – 160 MHz; 148 – 174 MHz
  • UHF: 400 – 430 MHz; 450 – 480 MHz
  • 6 Dual-Function Programmable Keys
  • FCC Narrowbanding Compliant

The VXR-9000 delivers the reliable performance and extended range needed. The slim-line design is crafted for easy installation and integration into most repeater sites.

Large Channel Capacity with Priority Scan

May be programmed with up to 32 channels and can perform in repeater or base station mode. Includes Priority Channel scanning for efficient communications monitoring.

Power Supply Backup With Alert

If DC power fails at the repeater site, the VXR-9000 will automatically revert to a backup DC power source if connected. Under backup DC power, the repeater will transmit an alert message to notify the operator that immediate attention is required at the repeater site.

Automatic Command Sequence Configuration

May be programmed to perform a five-step sequence of commands for certain operating events. For example, during a DC power failure when the repeater switches to a backup power supply, the repeater can be programmed to switch to low power and send a CW ID advising of the situation, etc.

Designed For High Reliability

The cooling fan diameter is 3+ inches and thermostatically controlled to ensure a stable temperature environment. Fan operation may be programmed for three options: off, continuous or temperature-controlled, depending on the application. A malfunction alarm is also included.

Simplex / Duplex Capability

The 50 Watt VXR-9000 is designed for simplex mode with single-antenna operation or full-duplex mode with the optional VXD-60 duplexer when optimal communications is necessary at all times.

FCC Narrowbanding Compliant

Meets the FCC Part 90 requirement for using 12.5 kHz channels by January 1, 2013.

Additional Features

  • 47 CTCSS / 108 DCS Codes Encode / Decode
  • CW ID Transmitter
  • CW Message
  • Multi-Tone Decode
  • Compander Per Channel
  • D-Sub 25 Pin Accessory Connector
  • Automatic DC Backup Switching Alert
  • EIA Rack Mount Size


  • 100-watt VHF (148-174 MHz) or UHF (450-480 MHz) module upgrade
  • Voice Inversion Encryption and DTMF Paging
  • Rolling Code Encryption
  • Internal Duplexer Options (Available for 50 W model only)

General Specification
Frequency Range 134 – 160 MHz
Number of Channels and Groups 32 Channels
Power Supply Voltage 13.6 V DC ± 10%
Channel Spacing (Analog) 12.5
PLL Steps
Current Consumption
Operating Temperature Range -22ºF to +140ºF (-30ºC to +60ºC)
Frequency Stability 1.5 ppm, 1.0 ppm (30 min. after wake up)
RF Input-Output Impedance 50 Ohms
Dimension (H x W x D) 3.5 x 19 x 13.5 inches (88 x 483 x 343 mm)
Weight (Approx.) 21.4 lbs (9.7 kg) 50 W model
Display 2-Character Numeric Display
IP Rating
Receiver Specification
Sensitivity 12dB SINAD 0.25 µV
Adjacent Channel Selectivity 85 dB / 75 dB
Intermodulation 82 dB / 78 dB
Spurious and Image Rejection 90 dB
Audio Output 4 W @ 4 Ohms
RX Hum and Noise
Transmitter Specification
Output Power 50 / 25 / 10 W
Modulation 16K0F3E, 11K0F3E
Maximum Deviation ± 2.5 kHz
Audio Distortion 2.5 % @ 1 kHz
Conducted Spurious Emission Better than 70 dB below carrier
TX Hum and Noise
There are no reviews for this product.
Write a review
Facebook comment